Awoco FT-1C18 18 W Wall Mount Sconce Sticky Fly Trap Lamp


New product

  • Voltage: 110V AC, 60hz; Power: 18 Watts, Coverage up to 900 sq ft. 
  • Lamp Overall Dimensions: 14-5/8"W x 5-3/8"D x 7-5/8"H. Glue Board Dimensions: 12-1/4" x 4-1/4".
  • No On/Off Switch; Must Plug/Unplug or Install Timer (not included)
  • Includes: two (2) UV Bulbs; one (1) Glue Board
  • Please click on this link to purchase:

More details

More info

[Quiet and Effective] - This Awoco sticky fly trap lamp is specifically designed to keep the living space or sanitary area free of pests, such as flies. Mosquitoes, moths and other small insects. Voltage: 110V AC, 60hz. Power: 18 Watts. Coverage up to 900 sq ft . Power cord with plug is included.
[Safe and Eco-Friendly Design] - The lamp utilizes the UV black light to attract pests to the lamp because of the irresistible light, which then captures the pests onto a sticky glue board. The glue boards are coated with a special non-toxic attractant that is safe to use. Glue boards should be replaced every 1 to 2 months for most effective results.
[Versatile] - Perfect for home, kitchen, restaurants, hotel, factory, supermarket, hospital, food industry, office and indoor places that have a lot of pests. Avoid installing the lamp outdoors where it’s exposed to the weather elements.
[Easy to Install and Maintain] - Easy to install with step by step instruction located in the description below and inside the package. Easy to maintain by changing the sticky glue board and replacing the UV bulbs after 5000 hours of normal operation.
[1 Year Limited Warranty] - Awoco sticky fly trap lamp is warranted for a limited period of 1 year parts, begin from the date of purchase. Awoco high quality product reputation and supreme customer service is a guarantee. Lamp Overall Dimensions: 14-5/8"W x 5-3/8"D x 7-5/8"H. Glue Board Dimensions: 12-1/4" x 4-1/4".

Installation Preparation:

  • Step 1: Choose a location with high insect density, close to an electrical outlet and easy serviceability.
  • Step 2: Do not install the lamp near any competing light sources, such as bright sunlit windows, indoor lighting fixtures.
  • Step 3: Install the lamp at least 70” high from the flow to avoid direct visual contact with the UV black light.
  • Step 4: The distance between the lamps and the ceiling should be 24” or more for maximum light attraction.

Installation Instruction:

  • Step 1: Lift the front shell and remove the UV bulbs to avoid causing damage to them during the installation.
  • Step 2: Hold the back plate against the wall. Determine the installation location and mark the screws’ locations with a pencil.
  • Step 3: Drill holes on the marked locations and insert the plastic drywall anchors.
  • Step 4: Install the back plate using the included screws to the anchors. Level the back plate and then tighten the screws.
  • Step 5: Install the bulbs and the sticky glue board. Note that the sticky side of the board should be facing the bulbs.
  • Step 6: Connect the power cord to the power outlet.